Multi-band amplifiers are used for pairing and strengthening TNT and FM antennas. Network amplifiers are used at the bottom of the building to strengthen the signal, leaving a return for cable networks.

What is a multi-band Amplifier?
This multi-band amplifier is ideal for interconnecting and strengthening some air antennas in the Matv factory. The amplifier uses selective filtering frequency and matches the UHF channel level. They selectively combined with the VHF ribbon.

Main Features of Multi-Band Amplifiers
Multi-band amplifiers are used to pair up and strengthen TNT and FM antennas and filtered signals received from upstream Equalizer filters. Network amplifiers are used at the bottom of the building to strengthen the signal, leaving a return for cable networks.

Multi-Mode Multi-Band
Functional structures that can be reconfigured for multi-band power amplifiers (MMMB) which can be reconfigured (PA), are proposed for the GSM/UMTS handset application. To overcome the frequency difference (MB) and the power difference (mm) between the GSM and UMTS standards, the proposed structure configures the PA nucleus and the output matching network.

MMMB PA was developed for the Low-Frequency Band Application GSM/EDGE/UMTS to verify the proposed structure performance. Efficiency degradation is limited to less than 2% compared to a single-mode. The measured RF performance validates the use of the proposed structure for MMMB applications.

Con-Current Multi Band Low Noise Amplifier
With a rapid expansion of wireless communication, the requirements for a transceiver that supports multiple services continue to increase and demand a low noise reinforcement design (LNA) simultaneously with low noise rates (NF), high gains, and high linearity in a broad frequency range for various wireless applications.

The proposed work focuses on multi-band LNA together that works on navigation frequency, namely, from 1.2GHz and 1.5GHz, wireless communication frequency, namely, from 2.45GHz and 3.3GHz, Short Distance Communication Frequency (DSRC) dedicated from 5.8GHz For vehicle communication applications.

This circuit has a different input matching network that is wholly desired by five frequency bands and is achieved by adapting the frequency transformation method.

Multi-band amplifier kit
We designed this kit specifically to meet the needs of Warfighter. At 24 ounces, A-320 amplifiers are the smallest and lighter on the market. The total solution kit provides functionality and uses in man-portable solutions.

A-320 KT includes amplifiers with fast release brackets, multi-band 90-512 MHz antennas, radio-to-amp RF cables, power cables, antennas, and antennas that can be adjusted angle with RF cables.

Thousands of units have been used.
The military-proven battle between the US and the Allies has made the A-320KT a key component of man-portable communication solutions. All kits, including AMP and accessories, weigh less than 3.1 pounds.

Operational readiness
A-320 has a self-diagnostic with system indicator that can be messed up to provide you information about power and performance status. This solution is radio-agnostic and compatible with the most military radio, 30-512 MHz.

Don’t pay for a half -time.
AMP A-320 provides 20 watts of power with a total value in the entire frequency range of 30-512 MHz-not part of the time.

A single battery operation no longer means less power.
A-320KT will be the average full ranking of up to 15 hours with a single 5590 battery. Use a single 5390 battery and extend operational life up to 24 hours. Time is based on a 15%transmission task cycle.

My factory is in China and has been established for 33 years. Specializing in the production of various amplifiers. Below is the Multi-Band Amplifier we produce.

Contact me for more information!